Flocculation Mechanism and Practical Application of PAM Powder

polyacrylamide flocculant

Definition of polyacrylamide flocculants

Polyacrylamide is a polymeric compound from acrylamide monomer.

Structure of polyacrylamide flocculant

The main chain of PAM is formed by repeated links of acrylamide monomers.

Water engineering research of PAM

The discipline of water treatment engineering believes that in order to increase the collision probability, increase the velocity gradient, and increase the energy consumption of the water body, that is, increase the flow rate of the flocculation tank.If the particles condense and grow too quickly during flocculation, two problems may arise:

If the floc grows too fast, its strength weakens

The rapid growth of the floc will sharply reduce its specific surface area in water.

Some small particles with imperfect reaction lose the reaction conditions, and the collision probability of these small particles and large particles is sharply reduced, and it is difficult to grow up again. These particles can not only be intercepted by the sedimentation tank, but also difficult to be intercepted by the filter tank.

Mechanism of action of polyacrylamide flocculant

The main function of PAM in water treatment is flocculation. It can promote the aggregation of small particles suspended in water into larger flocculates through the following mechanism, which is easy to settle or filter.

  • Neutralizing flocculation: PAM can neutralize charged particles in water and purify them, thus promoting the formation of flocs.
  • Hard flocculation: the addition of PAM can make the small particles in the water form a larger flocculant, and increase the adsorption force and mutual force between the particles.
  • Bridging flocculation: PAM is able to form Bridges that connect tiny particles together to form larger flocs.

Application of polyacrylamide flocculant

PAM flocculants are widely used in water treatment and environmental protection. The following describes several common application scenarios.

Sewage treatment

PAM flocculants can help remove suspended matter and turbidity in sewage, thereby improving water quality. In wastewater treatment plants, PAM is often used together with other flocculants to form a better flocculation effect.

Drinking water treatment

PAM flocculants can also be used in the field of drinking water treatment, where they help improve water quality. Through flocculation treatment, the suspended matter and turbidity in water can be effectively removed and the water quality can be improved.

Sludge dewatering

PAM flocculant can also be used for sludge dewatering treatment, an important step in the sewage treatment process. Sludge dewatering is an important link in sewage treatment process. Using PAM flocculant can accelerate sludge settling speed and improve dewatering efficiency.

Flocculant cleaning pool precautions and problem solving

Precautions and Problem-Solving When Using PAM Flocculant to Clean Swimming Pools.

  • Quality and dosage of PAM: Choosing good quality and appropriate dosage of PAM flocculant can obtain better flocculation effect.
  • Mixing ratio: PAM is usually used with other flocculants and needs to be mixed to ensure the best effect of the flocculant.
  • Mixing evenly: Before using PAM flocculant, it is necessary to fully mix it with the solvent to ensure the uniform effect of the flocculant.
  • Process control: According to actual needs, reasonable control of the flocculant addition process and time to ensure the smooth progress of the flocculation process.

Conclusion

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart